Ceiling type tri-proof light product overview
Applicable places
It is suitable for special occasions such as power generation, chemical plants, machinery plants, metallurgical plants, mineral processing plants, houses, warehouses, etc.
Performance characteristics
Lamps and electrical boxes are installed separately or in one,
The lamp is composed of high-quality aluminum plate spinning treatment, die-casting aluminum electrical box, high-efficiency reflector, prismatic glass cover, rubber sealing ring, hoop, stainless steel buckle
The lamp is lined with a reflector with extremely high reflectivity. The reflector is a product of precise optical design. It projects more than 80 percent of the indirect lighting light to the light after only one reflection.
The OPG3-N150-D ceiling-mounted tri-proof lamp needs to illuminate the working surface, which greatly improves the utilization rate of light. Compared with ordinary aluminum plate lamps, the lighting is increased by 1-2 times, and the electricity is saved by more than 37 percent .
Various installation methods such as hanging rod type, hanging chain type, bending rod type and light pole type can be adopted.
Can be equipped with metal halide lamp or high pressure sodium light source.
Model meaning:
OPG3-Power-B: Wall mount with tie bars
OPG3-Power-LG: Pole mount or boom mount
OPG3-Power-D: Ceiling Mount
technical parameter:
Rated voltage: 220VAC 50Hz
Shell protection: IP65
Insulation class: I
Anti-corrosion grade: WF1
Inlet thread: G3/4
Incoming cable: φ6~φ8mm
Applicable light source: metal halide lamp, high pressure sodium lamp, electrodeless lamp, energy saving lamp
Lamp head size: E27, E40
Dimensions: 280×320mm
Total weight: 3Kg (excluding electrical box)
Quality Assurance: When receiving the goods, please carefully check whether there is any damage to the product during transportation, such as scratches, cracks, broken glass and bulbs, etc.;
After unpacking the product, please check whether the accessories in the box are complete, such as instruction manual, product certificate, installation accessories, etc.;
After the lamp is installed, check whether the wiring method of the lamp is correct and whether the installation is firm before supplying power.
When installing and replacing light bulbs, bulbs of the same type and power should be used; if the bulb type or power is changed, the corresponding matching town should be replaced.
There is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; the center of the transparent part has a high temperature and should not be touched;
The cold start time of the light source is (3 to 10) minutes. It is normal for the light bulb to not restart under high temperature conditions. It is recommended to wait for the light bulb to cool down a little.
Restart; when disassembling and maintaining lamps, they should be operated by professionals. If any abnormal phenomenon is found, the power should be turned off and repaired. Non-professional maintenance personnel are not allowed to enter without authorization.
maintenance; the power supply must be disconnected before operation, and at the same time, ensure that the lamp is reliably grounded.
